DRONE COMMAND CENTREFLEET · CREW · COMPLIANCE

Remote Operations Centre · add-on

Docks and remote operations, inside the same gate.

The Remote Operations Centre brings dock-based remote operations into Drone Command Centre: dispatch through a gate that refuses to fly until every hard check passes, live video and telemetry, alarms and handovers, and a WORM operational log written at touchdown. For ReOC holders on Team and above who operate their own docks.

$349/mo + GSTper dock, flat · or $3,490/year + GST · dock setup $1,500 + GST for the first dock and $500 + GST each additional. Full add-on pricing

Requires a ReOC · Team and above · bundled on Enterprise · not available on Solo or self-hosted

The Remote Ops command centre: dock cards, wayline map, camera views, telemetry and the dispatch gate
Two dock cards, aircraft in dock and charging
The dispatch gate

Eleven hard checks. Dispatch is enabled only when every one of them passes.

The release gate you already use for crewed jobs, extended for a dock: the operational release is current, the BVLOS or area assessment is current, the dock is online with no HMS alarm and the aircraft seated, mains and backup and RTK and firmware are good, the site is confirmed secure from the dock cameras, weather and forecast are within limits, C2 primary and backup have acceptable latency, the wayline sits inside the approved area with RTH height and battery reserve, lost-link and flight-termination behaviour are verified, the flight area pushed to the dock matches, and the deconfliction check is clear.

Every attempt — refused or flown — is kept in Tasks & Replay with its gate snapshot, events, commands, track and the operational-log record.

Dispatch gate reading GATE GREEN — every hard check passed, with the job, operational release and flight plan listed
Dispatch gate. Green for J-1047 — job, operational release and flight plan all current.

What's in the add-on.

DocksDJI Cloud binding, dock state (cover, mains, backup, ethernet, RTK, firmware), HMS alarms, dock cameras for site security checks.
Waylines and missionsWaylines reviewed against the approved operating area; scheduled and on-demand missions; a seventeen-item remote-ops pre-start instead of the on-site list.
Command centreDock cards, the map, video views (dock cam, wide, zoom, thermal), telemetry, seats per operator position, handovers, and in-flight controls including emergency stop.
Alarms and event tickerWind gust, rain, lost link, low battery, ADS-B, mains loss, geofence — surfaced live and logged.
Tasks & ReplayEvery dispatch attempt with gate snapshot, events, commands and replies, summary, the record download and a track replay over the wayline. A command log covers every service sent to any dock.
The operational logOn landing: task summary, a WORM operational-log record with the Part 101 MOS 10.05 fields, and a flight_logs row that feeds airframe hours, battery cycles and the pilot's logbook.
SimulatorA simulated dock that runs the whole loop — cover, charging, take-off, wayline with wind penalty, RTH, precision landing — with injectable scenarios. Included in every trial.
Dock setupA one-time fee per dock — $1,500 + GST for the first dock, $500 + GST for each additional dock — covering DJI Cloud binding, commissioning and an operating session with your team against the real site. See the add-on sheet.
Included in every plan

Manual Ops first. Remote operations when you're ready.

Most operators come to remote operations by way of hand-flown work that they'd like to see from the office. Manual Ops does exactly that: link a controller and the flight appears on the board with pilot position, telemetry and a video feed, and the log writes itself at touchdown.

It costs nothing extra on any plan. The only limit is the number of concurrent live video streams your plan carries — Solo 1, Team 2, Business 5, Enterprise negotiated — never a per-stream fee.

A live Manual Ops flight card mid-survey
Manual Ops · Live. Monitor-only: the pilot holds authority, the board commands nothing.

Who it's for — and who it isn't.

YouWhat you needWhere to go
Hold a ReOC, operate your own docksThe Remote Operations Centre add-on on Team and above, at $349/mo + GST per dock. Your ReOC number is captured at setup; docks are the quantity.Ask about the add-on
Hold a ReOC, want after-hours coverA managed operations partner can cover your docks outside your window — the retainer without the commissioning.Partners
Own a dock, no ReOCA managed operations partner operates it under their ReOC, approvals, RPIC and insurance, on DCC. You see everything through their workspace.Partners
No dock yetThe platform, with Manual Ops on every plan. The ROC simulator is in every trial when you want to see the loop.Plans

The add-on is $349/month + GST per dock, or $3,490/year + GST, plus the one-time dock setup fee. Docks are the quantity, so the price moves only when your fleet does. If the add-on lapses, docks go read-only and dispatch is refused — nothing is deleted. Not available on Solo, or on a self-hosted deployment.

Run the loop in simulator first.

Every trial includes the simulated dock — dispatch gate, geofence, weather limits, video, the operational log at touchdown. Go live with the add-on.